View Single Post
Old 11-05-2012, 08:28 AM   #3
Festus2
Site Team
 
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
As mentioned above , it is most likely located in-line with the city water connection. It will be a floor level and hidden behind a removable panel of some sort. Try turning the pump on and listen for the noise - that is a good indicator of its approximate location.

If you plan on attaching a short hose from a container of RV antifreeze to the intake side of your water pump, then you will need a fitting - if it is a Shurflo pump. An RV supply place should have these adaptors - just be sure you get one of the make/type of pump you have. The fitting is a snap-in, O-ring type. Remove the intake hose, push the hose (with fitting) into the pump and place the other end in the container of pink stuff.

Not sure what method you are going to use to get the pink stuff into the lines but this is the method I use and it works for me.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
Festus2 is offline   Reply With Quote