Keystone RV Forums - View Single Post - Bent axle; free warranty or $ to upgrade??

audio1der · 08-20-2014, 12:25 PM

Thanks very much, all.
We've never turned the trailer tighly on anythng but gravel or dirt.

Dexter's "go-to" 3500 pounder is 2 3/8" but they can be made in 3" also (confirmed locally yesterday at Standen's)
I've been out of work for 3 mos so we may take the free axles and keep a close eye on things, spending the $$ is necessary after that.

We were supposed to be in Whitefish, MT right now for our big annual camp trip but cancelled because it was so expensive; I guess everything happens for a reason and this service episode is keeping us safe...

08-20-2014, 12:25 PM	#8
audio1der Senior Member Join Date: Sep 2012 Location: Airdrie, Alberta Posts: 552	Thanks very much, all. We've never turned the trailer tighly on anythng but gravel or dirt. Dexter's "go-to" 3500 pounder is 2 3/8" but they can be made in 3" also (confirmed locally yesterday at Standen's) I've been out of work for 3 mos so we may take the free axles and keep a close eye on things, spending the $$ is necessary after that. We were supposed to be in Whitefish, MT right now for our big annual camp trip but cancelled because it was so expensive; I guess everything happens for a reason and this service episode is keeping us safe... __________________ 2013 Passport 3220BHWE, upgrade axles, Kumho Radial 857's, all LED, TST507 TPMS, Reese DCSC, DIY corner stabilizers 2012 Ram 1500 Sport crew cab, Hemi, 4x4, 3.92 LSD, factory brake controller, S&B CAI w/scoop, Moroso air/oil can, 87mm ported/polished/knife-edged throttle body, Magnaflow exhaust, 180* t-stat, Rear lowered 2", Airlift 1000.