|
We have the Sprinter 310.
Follow the wires from the battery to where they enter the main body of the rv (below floor/behind frame). I used the spray foam to seal the opening where the wires actually enter. Same thing for the rear of the trailer.
You have wide cabinet doors above your sofa. I have had the screws for the hinges come loose. Care should be used to open and close thes type doors gently so not to put stress on the hinges.
I added a thin coating of silicone on the clearance lights. Plastic lens to light housing.
To combat the Texas heat, we have reflectix inside and out with Velcro. We limit opening the door to the outside.
Hope this helps!!
Pat
Our trailer is performing fine.
|