View Single Post
Old 05-16-2012, 06:00 PM   #5
nfd421
Junior Member
 
Join Date: Apr 2011
Posts: 12
Quote:
Originally Posted by mguay View Post
On my Suburban, the electrical switch is outside below the burner tube. I have read posts on other forums of people cutting into the elec side and wiring another switch in series and then just leave the outside switch on. Then on EBay for under $20 you can get an Attwood panel that has elec and propane on it.
I've been thinking about doin this mod for sometime!
yes this is what i want to do i have the switch on the side of the water heater but i just leave this switch on all the time and just turn off the breaker in the panel box but i wanted to replace my attwood 2 switch panel with a 3 switch panel and add the electric side of the water heater to the 3rd switch instead of using the breaker of outside switch. and didnt no if there was an easy way to do this or if i needed to add more wires from the water heater to the attwood panel
nfd421 is offline   Reply With Quote