Thread: Inverter
View Single Post
Old 06-13-2012, 01:31 PM   #18
AlCorr
Senior Member
 
AlCorr's Avatar
 
Join Date: May 2012
Location: New Bedford, MA
Posts: 167
Quote:
Originally Posted by hankpage View Post
The circuit feeding each fuse is the correct wire size for that fuse rating. The wires feeding a 15 amp fuse are not rated for 30 amps and can melt (burn) before the 30amp fuse blows. Like you said it was hard to get the heavy wires from the inverter to attach ..... that means the circuit was not designed for that gauge wire. The 40amp circuits you talk about are fed with heavier wire. Do yourself a favor and please (For safety sake) contact B&D tech support and ask them about your install. I'm very concerned, Hank

Before this goes any further ... What size inverter do you have?????
You are correct, and I'm not going any further with this.
__________________
2012 Bullet 248RKS
2004.5 Dodge 5.9L Cummins
Honda EU2000i
New Bedford, MA
https://i49.photobucket.com/albums/f2...R/IMG_1198.jpg
AlCorr is offline   Reply With Quote