2021 Cougar 30RKDWE Cable driven slide won't fully open

[OldRVer]

We just purchased a 2021 Keystone Cougar. It's 30 feet long with two slides.
the big slide is 12 feet long and just started to stop about 2/3 in the opening direction but completely closes. I noticed a sag in the drive chain on the wall above the slide and wonder if it could be out of adjustment.
Help.

OldRVer

[chuckster57]

Welcome to the forum

Cable adjustment would be the first thing I would do.

https://balrvproducts.com/wp-content...ublication.pdf

[OldRVer]

Manuals anywhere? YouTube?
I hope there’s someplace easier to get to adjust. There’s only 10 inches above slide facia. I’m gonna get my slender son-in-law!

[chuckster57]

Originally Posted by OldRVer

Manuals anywhere? YouTube?
I hope there’s someplace easier to get to adjust. There’s only 10 inches above slide facia. I’m gonna get my slender son-in-law!

Top facia can be removed.

[jxnbbl]

Since the facia is all just stapled on. I removed it entirely and put it in with small headed trim screws so that it can be installed/removed easily.

[OldRVer]

were you adjusting the cable slide when you removed the facia??

[markdol1]

I went through this when the motor ripped of the wall. If you are good with tools you can handle it,there is youtube videos on accuslide adjustments. If not its a real pain in the --- Let the shop do it.

[NH_Bulldog]

On my current trailer, the slide fascia is about 1” from the ceiling and the top of the slide itself is only about 8” from the ceiling.

I had to install a drip pan on the slide motor gearbox, and tidy up the wires that were hanging and dragging on the roof. Like Jay I had to remove the stapled on fascia and reinstalled with trim screws for ease of future access.