Springdale 189 Brake Light & Turn Signal Not Working

[keriann21]

The right brake light and turn signal have not worked for some time on my Springdale. We've tried changing the bulbs but it didn't help. The running light works though. Any suggestions?

[hankpage]

With flat blade 7 pin trailer connector #6 or brown wire is right turn and brake light. Start there and on matching blade of TV. If the bulb is good the problem is in the wiring somewhere. Could just be dirty contact.

[DEW]

I had a similar issue and the problem was actually the control module in the TV. Easy to figure this out as I used a multimeter to see if power was even going to the TT at the 7 pin Bargman connector.