|
06-20-2023, 12:57 PM
|
#1
|
Junior Member
Join Date: Aug 2021
Location: Long Sault
Posts: 9
|
E hitch possible broken part
Edited Asking for help in step up or instructions model equilizer e2br0710, towing 2021 EcoBoost with 2021 premier bullet 26rbp. 775 lbs tongue wt. 7700 max
Want to know if this hitch is correct to use, no labels on,now concerned , because space washers only 4 there, and head is broken off if that the way spacer works .
Have a road trip planned.
Thank-you Steve
|
|
|
06-20-2023, 02:19 PM
|
#2
|
Senior Member
Join Date: Apr 2019
Location: Henniker
Posts: 2,183
|
Quote:
Originally Posted by Giddyup
Asking for help in step up or instructions from e hitch have model e2br0710 was pulling 2016 f150 8v with wildwood srx26 toyhauler . bought new 2021 EcoBoost with 2021 premier bullet 26rbp.
Want to know if this hitch is correct to use, now concerned , because space washers only 4 there .
Have a road trip planned.
Thank-you Steve
|
Steve, I am sorry, but this is a seriously confusing post……..
|
|
|
06-20-2023, 02:20 PM
|
#3
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,357
|
If you’re talking about the washers that go on the pin to adjust the tilt of the ball, any washer that will fit is ok. You’re looking for 10 degrees to the back.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-20-2023, 02:49 PM
|
#4
|
Junior Member
Join Date: Aug 2021
Location: Long Sault
Posts: 9
|
Adjusted tks
|
|
|
06-20-2023, 02:51 PM
|
#5
|
Junior Member
Join Date: Aug 2021
Location: Long Sault
Posts: 9
|
Just trying get a pic of head on bolt that holds washer on, is that way missing , or has snap off
|
|
|
06-20-2023, 03:02 PM
|
#6
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,841
|
make sure the bolts you purchase are the correct grade …i’d check with manufacturer
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
06-20-2023, 03:14 PM
|
#7
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,479
|
Steve, That is a lot of trailer for a 1/2 ton. The specs you noted are from a sales brochure and not really your truck's actual specs. The tongue weight for your camper will be 975 lbs if you fully load the camper. That is an estimate. I recommend you get the truck and camper weighed at a weigh station. Look around the site for specifics on what you check for but the yellow/white sticker in your door frame will tell you your truck's max payload and if you are over or the hitch isn't rated for the tongue weight you are in danger of being unsafe. At 32' long, that camper will likely wag behind you unless you get the hitch set up perfectly and that is best done by getting actual weights from a weigh station. Get this right and your trip will be a lot more enjoyable.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
06-21-2023, 10:27 AM
|
#8
|
Senior Member
Join Date: Sep 2021
Location: Monument
Posts: 178
|
If it's broken, I wouldn't use it?
Might start with the manufacturer's instructions. The instructions from Equalizer make pretty good sense.
|
|
|
06-21-2023, 11:34 AM
|
#9
|
Senior Member
Join Date: Aug 2020
Location: Portland metro
Posts: 238
|
__________________
GMC Sierra 2500HD Duramax
2022 Cougar Half Ton 24RDS
Solarflex 400i + 150w suitcase; 206ah LiFePO4; ready for boondocking
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|