Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Travel Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-20-2012, 06:58 PM   #1
DennisT
Member
 
Join Date: Jul 2012
Location: E WA state wheatlands
Posts: 93
What is a good road tar/oil remover?

Hit a little spot of, "fresh oil," in some road construction. Didn't pick up too much, but as this is our first ever TT, (Springdale 266RL, 2009), I'd like to get off on the right, "cleaning foot." My earlier post about the plastic diamond plate area got some helpful tips, but I'd forgotten to specify the road oil part.

Thanks for any suggestions on products that will not hurt the painted aluminum.

Dennis
DennisT is offline   Reply With Quote
Old 07-20-2012, 08:16 PM   #2
campsd
Junior Member
 
Join Date: Jun 2012
Location: south dakota
Posts: 4
Try some W-D 40,I've used it to remove road tar on my vehicles without any problems.Just spray and let it soak a bit,then just wipe it off.Then just wash and some wax and you should be good to go.
campsd is offline   Reply With Quote
Old 07-21-2012, 01:27 AM   #3
Laredo291OH
Senior Member
 
Join Date: Mar 2011
Posts: 211
Hey DennisT,

You might also try a magic eraser. They are great for removing bugs from the front of TV also. I will usually apply some wax afterward cause it does such a good job takin things off I figure it has to be taking the wax off too. That's also another thing, keep everything waxed good, TV and trailer, makes them way easier to wash.
Laredo291OH is offline   Reply With Quote
Old 07-21-2012, 03:39 AM   #4
therink
Senior Member
 
Join Date: May 2010
Location: Rochester, NY
Posts: 1,605
Quote:
Originally Posted by campsd View Post
Try some W-D 40,I've used it to remove road tar on my vehicles without any problems.Just spray and let it soak a bit,then just wipe it off.Then just wash and some wax and you should be good to go.
X2- easiest method. No need to buy anything else.
__________________
Steve Rinker
Rochester, NY
2013 Outback Sydney 340FBH (12,280 lbs loaded-scale)

2015 GMC Sierra Denali 3500HD, SRW, Duramax, CC, SB (payload 3700)

https://i1109.photobucket.com/albums/...65/340FBH1.jpg
therink is offline   Reply With Quote
Old 07-21-2012, 08:04 AM   #5
ktmracer
Senior Member
 
ktmracer's Avatar
 
Join Date: Dec 2010
Posts: 321
Quote:
Originally Posted by campsd View Post
Try some W-D 40,I've used it to remove road tar on my vehicles without any problems.Just spray and let it soak a bit,then just wipe it off.Then just wash and some wax and you should be good to go.
x2 on WD 40. ONLY thing I use WD40 for is to remove pitch/tar from my hands, or small amounts of tar from vehicles. IMHO that's all the stuff is good for.

If you have a large area to work on, go to a hardware store and buy a quart/gallon of NAPTHA or "stoddards solvent". That's basically whats in WD40 and many off the shelf tar removers.
__________________
Outback 295RE

2004 Silverado CC/SB/ 4x4 Duramax
Pace 14' bike hauler with full living quarters
ktmracer is offline   Reply With Quote
Old 07-22-2012, 04:10 PM   #6
golfpro
Senior Member
 
Join Date: Jan 2012
Location: Hermiston or
Posts: 128
I used to use peanut butter when I was in High school to remove road tar. but that was a long time ago. I'm sure they make PB different now and there must be something out there that is made esp for removing tar., Have you gone to Wally world and looked for tar removing junk?
golfpro is offline   Reply With Quote
Old 07-22-2012, 05:39 PM   #7
azlee56
Senior Member
 
Join Date: Mar 2012
Location: Tucson AZ
Posts: 616
does wd40 hurt the finish?
__________________
"just ride away into the black and white sunset"
azlee56 is offline   Reply With Quote
Old 07-23-2012, 06:47 AM   #8
jsmith948
Senior Member
 
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 2,117
Quote:
Originally Posted by azlee56 View Post
does wd40 hurt the finish?
Haven't had a problem with WD-40 hurting the finish. I always wash the WD-40 off with soap & water after the tar is dissolved. I would guess that it does remove the wax along with the tar though
__________________

Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
jsmith948 is offline   Reply With Quote
Old 07-23-2012, 05:27 PM   #9
jbsmith
Senior Member
 
jbsmith's Avatar
 
Join Date: Dec 2011
Location: Dayton
Posts: 175
I've also used WD40 for adhesives, tar, etc and it works great. HOWEVER, I discovered that the WD40 will dissolve/break down the Dicor and other non-silicon caulk used on the seams of the trailer! I used it to clean off the factory sealant when replacing my tail lights. Just be careful and keep it off the caulk.
__________________
J. B. Smith
Dayton, OH

2012 Keystone Cougar 331MKS
2018 RAM 3500 Laramie 6.7L DRW
B&W Companion
jbsmith is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 05:25 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.