|
|
07-08-2010, 11:09 AM
|
#1
|
Junior Member
Join Date: Jul 2010
Location: calgary, alberta,
Posts: 3
|
failing decals off warranty
Hi everybody. Just came across this forum, thought it would be good to share experiences with fellow keystone owners.
We bought a 2008 315RL F.W., really like the trailer, have had good experiences with Keystone thus far, problem is a number of our decals are curling up and actually tearing. Front decal and some of the side decals.
Told by Keystone to contact the decal manufacturer (Burlington) about getting replacement decals. (and to try to get them replaced under warranty). Trailer now off warranty, and the dealer we bought from went out of business this year. Keystone says the installation of the decals are on our own account.
Wonder if anyone else has had this type of issue? Would appreciate any input folks may have.
|
|
|
07-08-2010, 11:59 AM
|
#2
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
Bob and Joyce: First, welcome to the Forum! Second, there are members who have similar problems to yours regarding the decals. In some cases, they have peeled off prior to the expiration of the warranty and in others, like yours, after it is off warranty. Some have found replacement decals from Keystone or their supplier only to find that they have again peeled. Not sure about what others have done. If you do a search of this forum for "decals" , "peeling decals" or similar, you will find posts describing their situation. I am just guessing but I recall there being more posts about the problem rather than the solution - which is often the case. If you do find an answer to your decal problem, we would appreciate hearing about it.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
07-08-2010, 12:08 PM
|
#3
|
Junior Member
Join Date: Jul 2010
Location: calgary, alberta,
Posts: 3
|
Thank you for your response. Glad I come across your forum, will be sure to check back often.
|
|
|
07-08-2010, 03:24 PM
|
#4
|
Junior Member
Join Date: Jul 2010
Location: Colorado
Posts: 9
|
Decals
2010 Passport Ultralite - Same issues - Front safety decal peeling off. Also the decals for the dump station / Grey / Black water also peeling off. They are relatively cheap to re-purchase, but a pain since its a new unit. Luckily, we won't have to worry about that come Monday. We have traded our unit for a completely different make and model. I will not purchase a Keystone produt again. Customer service from them has not been the most helpful.
__________________
2007 GMC Sierra 2500 HD - Vortec V8
2010 Keystone Passport 245RB.
Todd G.
|
|
|
07-09-2010, 06:15 AM
|
#5
|
Senior Member
Join Date: Nov 2009
Location: Elkhart, Indiana
Posts: 420
|
I've had the same peeling problem on a couple of different units not just Keystone. And it has been different manufactures of the decals. My units have been glass and not metal so I don't know if it might be the prep that is the problem. I'm pretty sure everyone gets the glass from the same place (Global Glass). Most of the decals I've had peel have been mostly on the front of the units.
__________________
Phil & Janine & Lady
2004.5 Chevy 2500HD Duramax LLY CC LB 4X4
2009 Keystone Sprinter 272RLS
|
|
|
07-09-2010, 12:36 PM
|
#6
|
Junior Member
Join Date: Apr 2010
Location: Charlotte, NC
Posts: 8
|
We have a 2009 Outback 5th wheel and the front decals are peeling (we've had it less than a year)...I contacted the dealer and they wanted me to bring it in so they could replace them...long story short, I opted to have the decals sent to me so I could replace them myself...the dealer is great to work with, just trust my work more than their service dept...they would have kept it 3 weeks (to verify the problem, order the parts, receive the parts, schedule the repair, and then do the repair)...since the dealer is over 100 miles away, I chose to do it myself, and warranty did cover the cost of the new decals...we'll see how long these last.
|
|
|
07-09-2010, 09:43 PM
|
#7
|
Junior Member
Join Date: Jul 2010
Location: Norcal
Posts: 9
|
I have an 2010 Fuzion and the Fuzion its less then a year old and is still under warranty, the decal that says Fuzion on the side of the unit is peeling off, I did not notice this but a fellow RVer did and showed it to me, to my surprize I couldn't believe it, anyways I took pictures of it and will be calling for a replacement decal soon, I would hope it being the name of the trailer there (brand) Keystone would be in a hurry to replace it, looks pretty bad when your own name is coming off a new trailer
|
|
|
07-09-2010, 10:35 PM
|
#8
|
Member
Join Date: Jul 2010
Location: Evansville, Indiana
Posts: 41
|
curious...
__________________
Always have fun!
2010 Summerland 2520 RD
2007 Chevy Silverado 1500 LTZ
|
|
|
02-05-2011, 08:29 PM
|
#9
|
Member
Join Date: Feb 2011
Location: Las Cruces, NM
Posts: 61
|
Peeled decals
The decals on my 2003 Cougar 276 started peeling in the third year. Although I keep the trailer under cover, anyplace exposed to the sun has resulted in the decal peeling. I was told the adhesive loosens up in the sun, which results in the peeling. I have thought of painting over the decal with a clear polyurethane but I don't know if that would work.
|
|
|
02-13-2011, 11:56 AM
|
#10
|
Junior Member
Join Date: Feb 2011
Location: Littleton, CO
Posts: 2
|
Anyone researched application of a "clear bra" on the rig? Especially on the end cap?? Would it be cost prohibitive?
|
|
|
02-13-2011, 01:13 PM
|
#11
|
Senior Member
Join Date: Mar 2010
Posts: 452
|
My 08 Cougar's 245rks front decal has started to peel off, the side decals are fine. I contacted Keystone and they gave me the 1 year warranty song and dance soooo I have been looking on Ebay and have found numerous decals that are close to what I need, they just don't say Cougar.
After their response like I care
I just haven't decided on Wolf, Mustang or Bison as my new camper.
Ron W.
|
|
|
02-16-2011, 11:09 AM
|
#12
|
Junior Member
Join Date: Feb 2011
Location: Florida
Posts: 6
|
The decals on my 2008 Montana are starting to peel. Keystone is no help. Some manufacturers do a better job. Paint is probably a better way to go, but I'm sure more expensive. I'll probably just remove them and stop advertising.
__________________
2006 GMC 2500HD Duramax 4X4
2008 Montana 3400RL
PullRite SuperGlide 3300
|
|
|
03-15-2011, 12:25 PM
|
#13
|
Junior Member
Join Date: Mar 2011
Location: Suches, Ga
Posts: 2
|
decals
Quote:
Originally Posted by bob and joyce
Hi everybody. Just came across this forum, thought it would be good to share experiences with fellow keystone owners.
We bought a 2008 315RL F.W., really like the trailer, have had good experiences with Keystone thus far, problem is a number of our decals are curling up and actually tearing. Front decal and some of the side decals.
Told by Keystone to contact the decal manufacturer (Burlington) about getting replacement decals. (and to try to get them replaced under warranty). Trailer now off warranty, and the dealer we bought from went out of business this year. Keystone says the installation of the decals are on our own account.
Wonder if anyone else has had this type of issue? Would appreciate any input folks may have.
|
We have the same problem, same year rv, etc.
|
|
|
03-15-2011, 12:45 PM
|
#14
|
Junior Member
Join Date: Mar 2011
Location: Suches, Ga
Posts: 2
|
Decal
We have had the very same problem with our 2008 and we did contact Burlington and the response we received indicated the decals were faculty but they would only replace 2009. However, Keystone said they would replace decals but we would have to install them. We are in the North Georgia area and wonder if anyone knows who might install these for us and reasonable. A beauiful RV inside and ragged on the outside.
|
|
|
03-15-2011, 01:08 PM
|
#15
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by gadawn
We have had the very same problem with our 2008 and we did contact Burlington and the response we received indicated the decals were faculty but they would only replace 2009. However, Keystone said they would replace decals but we would have to install them. We are in the North Georgia area and wonder if anyone knows who might install these for us and reasonable. A beauiful RV inside and ragged on the outside.
|
I,m sure any local sign company will do it for a price. Very few use paint any more they all use decals.
Mine curled and I removed them. Now the front of my Cougar is as bald as I am. My DW says bald is beautiful but I think I know a snow job when I hear one. .... Hank
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
04-18-2011, 11:13 AM
|
#16
|
Senior Member
Join Date: Mar 2011
Location: Souderton PA
Posts: 185
|
Here's a suggestion for the decal manufacturers - make them out of the same stuff they use to make the warning decals on RV sinks. I tried peeling them off and all I get is teeny tiny scraps of paper. The rest of the adhesive is stuck to the sink. It looks lovely. Thank God for citrus based solvents. If not for them, the stinking decal remnants would still be stuck to my sinks.
__________________
2008 Ford Expedition EL
2011 Keystone Bullet 31BHPR
Tracking straight and true with a Hensley Arrow
Tekonsha Prodigy playing the role of brake control
|
|
|
04-18-2011, 04:01 PM
|
#17
|
Senior Member
Join Date: Dec 2010
Location: Venice, FL
Posts: 484
|
Here's what I"m thinking about this decal situation, as I have a new trailer & want to keep it lookin new....how about having clear coat sprayed over the LUAN sealing everything! YOUR THOUGHTS!
__________________
Joe & Carolyn, Venice, FL.
2011 Laredo TT 297RL
2011 GMC Sierra Denali 2500 HD 4X4, Duramax Diesel/Allison Transmission, 3.73 Gears, Reese WD with two sway bars. Dometic 3000KW Generator.
|
|
|
04-20-2011, 05:53 AM
|
#18
|
Junior Member
Join Date: Apr 2011
Location: Cheyenne, WY
Posts: 12
|
I used to run a small sign business and I can tell you that none of the decals on RV's will ever hold up and last very long. They are vinyl and will shrink and crack and peel up when exposed to the sun and changing temps. I will be removing all of mine as soon as I pickup my new trailer tomorrow. There are some places using a new spray on clear bra system. We had it done to my wifes new car and it looks and works great! But it is very expensive, about $750 for the front of a VW Tiguan, so I would guess over a $1000 for the nose of an RV.
__________________
L I V E S T R O N G
|
|
|
04-20-2011, 07:00 AM
|
#19
|
Senior Member
Join Date: Aug 2010
Location: Dacula, GA
Posts: 620
|
GADAWN response for decals
I am located in N GA as well. Here are a few suggestions for decal installation in north Georgia.
Wild Willy RV Repair at 706.867.9978 is very reputable and runs an RV repair business. He is a former Keystone dealer before the recession. Located in Dahlonega but travels the area. Alternate suggestions: franchises such as; "Pro Tint" or "Fast Signs" install all types of graphics on all types of vehicles. I am sure they can help you or point you to someone close to you who can. Also check with RV World of Georgia, located in Buford, GA and/or Camping World on I 985 in Oakwood, GA.
|
|
|
04-20-2011, 12:49 PM
|
#20
|
Junior Member
Join Date: Apr 2011
Location: anderson, sc
Posts: 9
|
I just pulled the decals off the front and compound and waxed the front cap. Looks good, might even later on have someone paint all the stripes and designs on so I want have to worry with the decals anymore.
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|