![]() |
|
#1
|
|||
|
|||
|
Thanks, Wayne |
|
#2
|
||||
|
||||
|
Wayne -
Welcome to the forum and the new Alpine! I don't know if it would be considered warranty or not. There are "kits" you can get at HD, Lowe's, Amazon, etc., that contain various grits of sand cloth and polishing cloth along with polishing liquids. Quite a bit of elbow grease, but it will work. There has been another long thread in the Forum on Corian scratches, etc., that you should be able to find with a search. If you don't want to DIY, I would guess that cabiniet builders who install Corian could take care of it also. One point DuPont makes about Corian is that it is consistant through the material. So, if you have a burned (or scratched, in my case) area, carefully sanding it down through finer and finer grit and polishing compound will correct the problem. Rather than get the 400 grit out and attacking it, I would recommend the DuPont Corian kit. Ron
__________________
2011 Alpine 3640RL (Beauty) (Gone! Replaced by Beauty2) Onan QG 5500LP with Command Center 30 2011 Ford F-350 (The Beast) Diesel 4x4, DRW, LB, CC Reese Elite 25K hitch |
![]() |
| Thread Tools | |
| Display Modes | |
|
|